David Lehmann

cover

IMG_4028.jpeg

IMG_4030.jpeg

IMG_4031.jpeg

IMG_4032.jpeg

unnamed.jpg

plate_1.png

matthewsmessmakers

IMG_7530.jpeg

Great design. Kids robbed it immediately and have demanded more. Supports on build plate and I increased the top z distance to 0.3 as I know from testing it won&#39;t cause issues on my printer and makes the supports easy to removeIf you have any problems with the profile I would reduce that back down. &nbsp;Tested on the A1 mini on a supertack coolplate in deeplee PLA&nbsp;

0.2mm layer, 2 walls, 15% infill

kilinccagatay

IMG_5855.jpeg

IMG_5856.jpeg

IMG_5854.jpeg

I shaved the model from the back side to make it flat and changed the orientation so it reduces the print time significantly.

Different orientation 0.24mm layer, 2 walls, 15% infill

Here is a Lightsaber stand I designed which should hold all different types of sabers! I wanted the stand to be skinny enough that it practically disappears when looking at it straight on and I&#39;m happy to say it does! I was able to accommodate my 5 sabers to fit the stand but I&#39;m hoping it can be used for any saber out there that you may have! Thanks!

Vertical Lightsaber Stand

ASIA

Print Profile(2)

Description

Comment & Rating (9)

License

Related Models