Pink Phanter Lamp
Print Profile(1)
Bill of Materials
Description
Fantastic Pink Panther lamp design!
I created this design for easy 3D printing.
Printing recommendations and tips:
I printed the body with 3 walls and 25% infill on a gyroid to give the figure more consistency and weight.
I printed the tail with 100% infill.
The lampshade was printed in cup mode.
And the base of the lampshade was printed with two walls and 10% infill, and with tree supports.
If printed in white, the LED will create the ambiance you prefer.
On the other hand, the LED light used is:
https://eu.store.bambulab.com/es/products/mini-waterproof-rgb-led-tea-lights-with-remote-control?id=53613658931548 ref:KC020
It's small and compact, so there's no need for any messy cables.
If you find the light effect is dim, remove the cover to increase the brightness.
You only need a bit of TPU double-sided tape to attach it to the base of the light shade, directing the light downwards.
I recommend painting the model. In my case, after priming, I used POSCA-type acrylic markers from AliExpress (colors 606, 612, and 658). The 3Mf profile, already painted by Bambu Studio, is also included if you don't want to paint it by hand.
Boost Me (for free)
Do you want more models like this??? Support me
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)