The Gates of Moria - Atmospheric Table Lamp

The Gates of Moria - Atmospheric Table Lamp (for LED Kit MH-001)

Description:

"Speak, friend, and enter."

Bring a piece of Middle-earth to your desk or shelf! This lamp is inspired by the legendary G

ates of Moria (Durin's Gate). It provides an atmospheric, warm light, perfect for cozy evenings or as backlighting for gaming.

The design is detailed, with masonry structures and iconic pillars, yet easy to print.

🛠️ Required Hardware (BOM)

This model was specially designed for the following lamp kit:

• LED Lamp Kit MH-001 (Bambu Lab / MakerWorld Standard Kit)

🖨️ Printing Instructions

To make printing as easy and clean as possible (and to minimize supports), I have divided the model into two parts:

1. Front / Main Body: The main part with the gate and details.
2. Top / Light Mount: The top piece that holds the LED module with cable channel.

• Material: PLA (Matte colors like gray or stone look best).
• Supports: Required depending on orientation.
• Infill: 15% Gyroid is sufficient.

🎨 Painting & Post-processing

The model already looks great when printed "raw", but for the authentic "stone look" I recommend the following steps:

1. Primer in dark gray or black.
2. Dry Brushing: Lightly brush over the edges with a lighter gray and then white to highlight the masonry details.
3. (Optional) Apply a light wash (thinned black/brown paint) into the recesses to create more depth.

📦 Assembly

1. Print both parts.
2. Attach the MH-001 LED Kit in the back part (Back/Light Mount).
3. Route the cable through the designated opening.
4. Slot or glue (superglue recommended) the front and back parts together.

Have fun printing! I would be very happy about a boost or photos of your makes!