Magnet Dispenser - Pull the lever to dispense
Print Profile(2)
Description
Pull the lever to dispense a single magnet at a time! It will magically land on the front pedestal correct polarity for your projects. Easily reload by placing magnets in through the top.
I currently have the following magnet sizes supported (and need testers, so please give me feedback!)
6x2 - untested
6x3 - untested
8x2
8x3 - untested
10x2 - untested
10x3 - untested
If you want other sizes let me know and i will upload them!
Tested in PLA / ABS / PETG.
Directions:
- Print the files as they lay in the .3mf, most parts will require supports and they are turned on in the file.
- Remove the supports and ensure surfaces are smooth. (PETG as an interface layer for PLA works great to save time here)
- Push the bottom magnet pusher through the bottom rectangular hole to clear out any hanging filament and ensure smooth operation
- Place magnets in the same polarity in the two slots on the side of the dispenser
- Assemble the parts together as they are in the photos
- Place magnets in through the top
- Enjoy dispensing
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (9)