Wildcat

cover

tempImageNljkir.jpg

plate_1.png

plate_2.png

plate_3.png

b4f6dccec65de85b.jpg

<p>Simple adaptation of the sideshelf for AMS-HT, shout out to Darren 3D print, for the initial design work! I used PPA-CF as I had some left over; however, you could use any filament with a higher heat tolerance for the legs, as the drying function will exhaust heat out the top and sides. So ABS, ASA, anything with a higher printing temp would work. Adding GF would give it some added heat dispersion as well if you&#39;re really that concerned about it. I haven&#39;t experienced any issues. The shelf can be printed out of PLA+, as the heat exits out the top and sides, the cutout in the shelf allows for plenty of air flow for the dryer. I built heavy walls and infill because with the addon extension, the polyphemus can dry and externally distribute 3KG spools. However, I added the STLs as well if you want to do your own thing and print your own settings. </p>

0.2mm layer, 4 walls, 25% infill

<p>EIBOS Polyphemus Side Shelf for DP3 Riser on the H2C, H2D, H2S.</p>

Eibos Polyphemus Side Shelf DP3 riser H2 series.

ASIA

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models