Tali Zorah Mass Effect HueForge
Print Profile(1)
Description
Note on Image Rights:
This HueForge model is based on an existing image/motif. I do not claim any image or trademark rights to the original or the depicted motifs. All rights belong to their respective owners.
The model is for non-commercial, private purposes only.
Project: Tali Side.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.32mm
The Model is 163.33x245mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 1.96mm and the Actual Thickness is 1.68mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#5e43b7 PLA Bambu Lab Basic Purple Transmission Distance: 7
#e7ceb5 PLA Bambu Lab Basic Beige Transmission Distance: 8
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.56mm) swap to Purple
At layer #9 (0.64mm) swap to Beige
At layer #21 (1.12mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)