Bambu Lab PTFE Guide - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

raeuberhose

3D Printer>3D Printer Accessories

IP Report

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

ABS/ASA profile, 0.2mm layer, 2 walls, 15% gyroid infill

Designer

20 min

1 plate

4.5(204)

Regular profile, 0.2mm layer, 2 walls, 15% infill

22 min

1 plate

4.7(134)

PETG - 0.2mm layer, 2 walls, 15% infill

18 min

1 plate

4.7(152)

A1 0.2mm layer, 2 walls, 15% infill

21 min

1 plate

4.8(15)

Click to see more

Open in Bambu Studio

Boost

491

1102

588

3.4 k

2.6 k

Released

Description

Update 03.01.2022: version v3 is available. The bend radius has been changed to roughly 40mm to address the binding issue, which could create problems when loading stiff/rough filaments.

Update 29.12.2022: added new version PTFE_Guide_v2.3mf. The overall height has been shortened again, to prevent the top of the guide from scraping the front of the housing, when unloading filament (see last two pictures).

For this remix, I made a few changes to address some issues I experienced.

Widened the outer base by 0.8mm, as the original guide would break quiet easily, when pushing it on to the bracket.
Mirrored the position of the struts to the front, so the tube radius is not too tight.
The overall height has been reduced, to clear the PTFE tube from hitting the top glass.

No supports are needed, when you print it on it's back.

Printed in 0.2mm layer height, with ASA Fillamentum Extrafill Anthracite Grey scaled to 103% - to accommodate shrinkage.

If you have any ideas/suggestions please feel free to comment.

Thank you Mol for posting this.