HK 91 Magazine Speed Loader

This is a Magazine Speed Loader for the 308 HK-91, PTR-91, G3 OR similar that use the same magazine as the following

• HK 91
• HK G3
• PTR-91, PTR PDW
• Vector 51, G3K, HK51, HK51K
• Century C308 & HK .308 Clones
• HK PSG-1
• HK MSG-90
• Custom HK builds & clones

This Loader like my others uses minimal hardware and is quick to assemble!

Needed:

2 x m3 x 14mm socket head screws, for the Trigger hinge pins

1 x spring 8mm OD X 6.5mm ID x 25mm Long, for the Magazine Release

see images for assembly

Note: due to the shallow angle of the Magazine Release cutout, some minor sanding or trimming may be required for a smooth fit.  

This Loader uses my “Snap Fit” Magazine Release design, to help keep the Button locked onto the split shaft of the Release arm, wedge a small piece of material of your choice in between the fingers of the arm, I used a length of zip tie and left it just below the surface of the button so I can remove it later if necessary.  See Image above with red circle.

Function video below

Happy Loading!