Love Heart - Valentine's Day or Wedding Gift

Willkommen bei Frank druckt 3D

Welcome to Frank druckt 3D

Frank 3D Printsへようこそ

欢迎来到 Frank prints 3D

Im a hobbyist with ambitions. You can find me here and on other Platforms. My main Platform is TikTok. The time for my Website is rare so please do not expect too much updates. On TikTok you should find daily videos about 3d printing and my Journey! Please consider following me and keep asking questions, i will try to help everybody as long as i am able too!

About this model

It's time to prepare for Valentine's Day! Do you already have a gift for your loved one? If not, here's the rescue! In a short time, you can create an individual heart with this model as an absolute proof of love. Of course, you can choose the letters yourself and print them individually! These are connected to the model with a plug-in system. Of course, the stand is also included!

...and if you're not entirely sure, you don't have to glue the letters, they hold up quite well without glue and can be exchanged if in doubt ;-)

I have placed this model on the build plate in 3 different versions. All three are easily printable, but with limitations! Please read the instructions carefully so you don't experience any unpleasant surprises! Especially when time is short, it's important to know what you're printing!

So don't be impressed or deterred by the print time in the profile, you only really need to print one of the three heart plates and you decide which one! Unfortunately, it is no longer desired to upload different profiles, which is why I have summarized all three options in one file.

Notes and Print Tips

In the file for the heart, you will find 3 printing plates!

Plate 1:

0.18mm layer for all materials and good results, printed flat with supports for best results and best adhesion

Plate 2:

adaptive layer height for finer details. Please do not print with SILK PLA, as this results in dull layers and lack of shine. Adaptive layer height is often the death of beautiful Silk-shine

Plate 3:

Faster upright printing with 0.2mm layer height. Also works well with Silk materials and creates a smooth and high-quality outer wall. Especially the flowers and blossoms are shown off even more perfectly this way, and layer lines almost completely disappear, BUT, upright printing is of course not entirely without risk. A small error is enough to knock the print off the print bed. Not recommended for A1/A1mini or other bed slingers.

Don´t blame me when it fails on plate 3!

If you like my work there are a lot of way how to support me! 

The easiest and most direct way is to leave a boost…

You can also support me with a membership! They start at the lowest tier possible here on makerworld. For just 3 bucks a month you can force me to continue uploading more and new models ;-) I wouldn´t be able to leave a month without new models when there are people who support me with their hard earned money… LoL therefore im to well educated ;-)

Also you can use my Amazon links in the descriptions, when i tell which Filament i use! Links like this here:

Buy PLA Filaments on Amazon

But the most convenient way to support me, without paying anything is to follow me on TikTok, leave some likes, share some videos and spread the message that im there! 

If you are a designer, you can also contact me to show your models, if you are a shop or manufacturer feel also free to reach out! Im here to show people the beauty of 3D printing and sharing my journey in this hobby. Showing off what others can do is also part of the game! Support ist kein Mord! (support is no murder, we say in germany)