67 Slinky Fidget (39 grams filament)
Print Profile(1)
Description
ATTENTION: Please observe the warning when slicing in Bambu Studio that nothing is floating in the air. Please DO NOT activate supports
This is a 67 Slinky Fidget in 67 form for only 39 grams of filament. It is very easy to print if the following conditions are observed
Requirements
- Filament= PLA (no PETG)
- The filament is dry and calibrated
- The printer is calibrated
- The temperatures are exactly what the filament requires
- The print bed is clean
Instructions:
First, you must remove the Slinky from the print bed. Then you must break apart the individual circles with a small knife (cutter or household knife). This works very well if you take the beginning of the Slinky and break it apart with a small knife. After that, (if all conditions have been met) you should only be able to tear the Slinky apart by hand. If the thin beginning of the Slinky still bothers you, you can simply cut it off with scissors. DONE 😊
Side note: It is not a real Slinky but simply a bit stiffer. That's why it is also called Fidget
Membership
Do you want to sell 3D prints of this design? 🔥 Acquire a commercial license to sell 3D printed versions of my designs at craft fairs, online, in stores, or wherever you like! Click Join to sign up and start selling today. 🚀 I would be delighted.😉😊
Boost Me (for free)
If you like my Slinky, I would be very happy about a boost.😊
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (155)