Search models, users, collections, and posts
Honeycomb storage wall with LED (HSW)
Remixed by
IP Report
Print Profile(2)
0.28mm layer, 3 walls, 0% infill
Designer
2.4 h
1 plate
All Plates, 0.28mm layer, 3 walls, 0% infill
29.6 h
15 plates
Open in Bambu Studio
Boost
1184
3117
196
154
1.8 k
402
Released
Description
Honeycomb Storage Wall with LED :
Here is my version of the Honeycomb Storage Wall with a 1.4cm thick LED strip
The piece is 90cm by 60cm
Printing settings :
- Layer height : 0.25 – 0.3
- Wall loops : 3
- Infill : 0 %
- Brim type : Outer brim only
Optional :
Bottom surface pattern : Monotonic line
All inserts are here : https://makerworld.com/en/models/22521#profileId-27457
You need :
4x « Hexagon-countersung-and-hole (2x) »
7x « Insert-countersunk »
8x « Insert-hollow-for (4x) »
11x « Cover-countersunk »
Follow the instructions below for assembly and installation.
Here is a video of the project : https://youtu.be/EOUkTK0voWo
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (196)