MTG +1 / +1 Pizza counter TMNT - Free 3D Print Model

Search models, users, collections, and posts

Kyro

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

P1S

H2S

X1 Carbon

X1E

P2S

H2D Pro

H2C

H2D

P1P

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

10.7 h

2 plates

3.7(3)

Open in Bambu Studio

Boost

327

182

Released

Description

I have some +1 / +1 tokens, I printed, which were uploaded by TheMakerSphere, these being round in shape, inspired me to make pizza ones for the upcoming Teenage Mutant Ninja Turtles pre-release. I have used the +1/+1 's from TheMakerSpere as inspiration to design these (althoug these are completly my own design, but I wanted to give them a shoutout for the inspiration). They are a tiny bit bigger and feature a 3D texture to the top, where the text, the pepperoni, the pizza slices, and the crust are 3D rather than flat. This caused a few printing issues when I first started this project. I have set up a pause at layer 29 to allow the yellow (cheese) filliment to be swapped out from black for the lettering (if you have more than one AMS, this won't be an issue, and you can remove the pause). This allows support material to be used, which I recommend (unless you really enjoy removing supports and/or sanding prints).

After that, they clip together with the dial in the middle, and the dial spins really easily too.

I hope you enjoy these! I have printed a load of them to allow me to hand them out at my local TCG shop on the pre-release.

Enjoy :)

magic the gathering

teenage mutan ninja turtles

Comment & Rating (11)

@demiurgodk

Any chance you upload just the pizza counter without the +1s? I would love to use it as food token.

@user_2067020770

just remove them in the slicer dude. takes 2 seconds.

@user_2585005406

Replying to @user_2067020770 :

how do i do that

@laurenbkitty

Kinda confused how these print with the small circle on the bottom without a TON of support. Is there a way to make them print side down all flat? (I'm new to this and want to make them for TMNT deck for my husband..)

The designer has replied

@Kyro93

I had to use PLA support material and ot worked a treat, if you dont have 2 AMS units you will need to pause at a layer height and swap a colour out so you can still have 4 colours and use the support material.

@GoblinKing

Boosted

Looks great thanks!

@user_737806276

Do you have more photos of them apart? I printed them out to give out at our TMNT play-party this coming Saturday afternoon and not positive how the plate of covers should look and not looking to mess them up.