Toy Steam Train Mini - 0.2mm Nozzle Required

I have a riddle for you:   What is cute, tiny, looks like a steam train and is very hard to stop printing more of once you have access to a 0.2mm nozzle?

You have probably worked it out by now.   It's the Toy Steam Train Mini

Important Note:  This requires a 0.2mm nozzle to print.   If you have the standard 0.4mm nozzle this is not for you (or more likely it is for you and you need to buy a 0.2mm nozzle right now)

Yes, this is essentially a tiny version of the much loved Toy Steam Train.   There are some tweaks to the model to ensure it prints correctly.  I thought it makes sense to be its own model as it has nozzle requirements and the cuteness factor is off the scale compared to its larger brethren.

Features

• It's a steam engine (that is a feature all to itself)
• It is easy to print, no supports, no mess, no fuss. (requires a 0.2mm nozzle.   Have you been warned enough yet?)
• It assembles in seconds, still no mess and no fuss
• It rolls on wheels (kind of like a train)
• It is tiny

Assembly

Here's the best strategy for assembly:

• Gently insert the 4 wheels with axle though the 4 axle holes in the base.  Don't try to force it
• Lie the train on its side with the wheels on the table and the axle protruding vertically on the top side
• Press the standalone wheel hole into the axle until you hear the click
• Repeat for 3 remaining wheels

In the Series

Check out the full train series here:

	Toy Steam Engine Train
	Toy Steam Train Tender Car
	Toy Steam Train Freight Car
	Toy Steam Train Passenger Car
	Toy Steam Train Caboose
	Toy Steam Train Tracks
	Toy Steam Train Mini - 0.2mm Nozzle

Please leave any comments of feedback.