Unifi Travel Router Case with Storage and Stand

Were you one of the fortunate ones to acquire Ubiquiti's new Unifi Travel Router? I have put together a snug case that can store the UTR, the wire and a built in way to stand the UTR at an angle to get cooling on all sides. It even has room to store Jsaux's 180° USB C adapter to help snake the wire around behind it.

Edit: If you prefer a sliding case instead, see my other model here, https://makerworld.com/en/models/2406070-unifi-travel-router-sliding-cover-with-storage#profileId-2637573

Edit #2: The case is very snug to the base. It can be tough to remove but it is doable. Please note, that I made a looser fitting top that is much easier to take off but it still fits well enough to stay put. Please check out one of these profiles:

I saw some of the models that are available and some of the feedback people had given, so I decided to jump on this to make a new case with wire storage and a stand built in. It only adds about 52mm (2") to the original length of the UTR.

There's about .5mm between the top of the UTR to the bottom of the case. With the snug fit, it shouldn't move at all.

I made the top of the case a snug fit, so I left a 1mm gap to allow your finger nails to get in to help pull it apart.

There are 2 options for the top cover, 1 with and without the Unifi Logo.
 

Edit 05/17/26:
I have uploaded a new model that is allows access to the ports at the top and bottom. Click here to see it.