Gridfinity Swatch Bin (90 slots)
Print Profile(1)
Description
Here we have a Grifinty filament swatch organiser. I've see a few around however I needed a holder which could take larger swatches than the Bambu ones, and could also hold up to 90 samples.
Grdfinity size is 2x4. I pronted using PLA on a H2S but should be ok for any printer.
This section applies to light boxes
A version without the writing on the back and without the 12mm hole is also available.
Parts that I use in my light boxes
Note: I use components that are readily available through AliExpress. There are many variations of these items that you can use if you can find local suppliers.
| Item | Comment | Link |
| 12V Mains adapter | This is for the AU version, choose one that suits your location (1A) | https://www.aliexpress.com/item/1005003438232392.html |
| LED Strip | I used the 3mm version as it's easier to bend around the light box. Choose the 12V version to match your adapter. The 320 LEDs item is bright enough for a light box. I usually choose the 1m versions - it can be trimmed if needed. | https://www.aliexpress.com/item/1005005626311944.html |
| DC 12v socket | These fit nicely into the back plate of the light box with the pre-made 12mm hole. I solder the LED strip to the socket terminals. Only two pins of the socket are used. | https://www.aliexpress.com/item/1005007870570657.html |
| Inline switch | This inline switch allows you to turn the light box off or on. | https://www.aliexpress.com/item/1005005754107667.html |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)