Westfall

cover

chrome_jUEag2Loi7.png

plate_1.png

IMG_4257.jpeg

IMG_4258.jpeg

Printer profile: Bambu Lab P1S, 0.4 nozzle Plate: Textured PEI Plate Bed temp: 55°C (initial 55°C)Material: PLA (file contains Generic PLA + an eSUN PLA Silk profile) Nozzle temp: 220°C (initial 220°C) Filament flow ratio: 0.98 Max volumetric speed: 12 mm³/sLayer height: - Base layer height setting: 0.20 mm - Variable layer height profile used: ~0.12 mm to 0.20 mm (adaptive/variable layers) - First layer height: 0.20 mmLine widths: - Default line width: 0.42 mm - Initial layer line width: 0.50 mm - Outer wall line width: 0.22 mm (custom) - Inner wall line width: 0.22 mm (custom) - Top surface line width: 0.42 mm - Sparse infill line width: 0.45 mm - Support line width: 0.42 mmWalls / Top / Bottom: - Wall generator: Arachne - Walls: 3 - Top layers: 7 (custom) - Bottom layers: 3 - Top surface pattern: Monotonic Line - Bottom surface pattern: MonotonicInfill: - Density: 20% - Pattern: Grid - Direction: 45° - Sparse infill speed: 270 mm/s - Internal solid infill speed: 250 mm/sSupports (enabled): - Type: Tree (auto) - Build plate only: ON - Critical regions only: ON - Overhang threshold: 30° - Interface layers: Top 2 / Bottom 2 - Interface spacing: 0.5 mm - Top Z distance: 0.2 mm - Bottom Z distance: 0.2 mm - Tree branch angle: 45° - Tree branch diameter: 2 mm - Tree branch diameter angle: 5 - Tree branch distance: 5 mm - Remove small overhang supports: ONAdhesion: - Brim: Auto brim - Brim width: 5 mm - Brim object gap: 0.1 mmSeam: - Seam position: Back - Seam gap: 15% - Seam slope conditional: ON - Seam slope inner walls: ON - Seam slope steps: 10 - Scarf seam on circles: ON - Scarf angle threshold: 155Speeds: - Initial layer speed: 50 mm/s - Initial layer infill speed: 105 mm/s - Outer wall speed: 50 mm/s - Inner wall speed: 150 mm/s - Top surface speed: 200 mm/s - Support speed: 150 mm/s - Bridge speed: 50 mm/s - Travel speed: 500 mm/sAcceleration: - Default acceleration: 10000 - Initial layer acceleration: 500 - Initial layer travel acceleration: 6000 - Outer wall acceleration: 5000 - Top surface acceleration: 2000 - Travel acceleration: 10000Retraction / travel: - Retraction length: 0.8 mm - Retraction speed: 30 mm/s - Z hop: 0.4 mm - Wipe: ON - Wipe distance: 2 mm - Wipe speed: 80% - Retract restart extra: 0Cooling / fans: - Part cooling fan min: 100% - Part cooling fan max: 100% - Fan off for first X layers: 1 layer - Auxiliary fan: ON - Additional cooling fan speed: 70% - Overhang fan speed: 100% - Exhaust fan during print: 70% - Exhaust fan after print: 70% - Slow down for cooling: ON (target layer time 8s)Surface finish: - Ironing: TOP only - Ironing pattern: Zig-zag - Ironing speed: 30 - Ironing flow: 10% - Ironing spacing: 0.15 - Ironing inset: 0.21 - Ironing direction: 45°Other quality: - Elephant foot compensation: 0.15 mm - Arc fitting: ON - Resolution: 0.012 - Pressure advance value: 0.02 (but enable_pressure_advance is OFF)

0.2mm layer, 3 walls, 20% infill

Air Kev Dream Chaser Championship Ring

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Dream Chaser Ring

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models