Bushnell TRS-25 Windage Adjustment Cap
Print Profile(1)
Description
These are replacement adjustment cap covers for the Bushnell TRS-25. They are designed to be easier to grab, and it also has a small built in tool (small rectangle of material at top of the cap) to let you adjust the windage using just the cap.
Make sure you have the original o-ring installed, or at least a replacement for the original one.
These do have to be threaded a little bit first, before they're easy enough to remove and screw back on.
First put the 3d printed cap onto the top windage adjustment (its easier to grab the cap from that one). It should fall through about a milimeter or two without touching the threads. Turn it as if you were unscrewing it to help get it centered. Now just keep tightening the cap onto the threads until theres too much friction to turn with two fingers, then untighten it a bit. Keep doing this until the cap touches the o-ring.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)