Print Profile(1)
Description
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.
Boost Me (for free)
If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊
Print Difficulty level: [5/10]
[ My Print Settings for 15 cm figurine ]
Nozzle: 0.4mm
Layer Height: 0.15-0.2mm
Infill: 5-10%
Wall loops: 2-3
Supports: Tree (auto)
Printed with: PLA Black + Golden Paint (or not)
Printed with fuzzy skin effect:
- Fuzzy Skin: Contour
- Fuzzy Skin Point Distance: 0.2
- Fuzzy Skin thickness: 0.2
These photos are real and show an actual 3D-printed figure photographed by me.
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)