Echo Dot 4&5 @ IKEA Skadis - Free 3D Print Model

Search models, users, collections, and posts

MutualGarden

Household>Decor

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

1 h

1 plate

4.7(25)

0.20mm layer, 2 walls, 15% infill

1.7 h

1 plate

5.0(4)

0.2mm layer, 2 walls, 15% infill

15 min

1 plate

4.2(11)

Open in Bambu Studio

Boost

112

329

508

281

Released

Description

Layer 0.2

PETG
NO Support
You only need to glue the two hooks to the holder

Comment & Rating (44)

@3dprintdesign94

Print Profile

0.2mm layer, 2 walls, 15% infill

Truly fantastic idea, the comments inspired me to adjust the model, I will only need to print it to see if it fits

Show original

@Tubs0169

Print Profile

0.2mm layer, 2 walls, 15% infill

passt

@Tubs0169

Print Profile

0.2mm layer, 2 walls, 15% infill

Very practical

Show original

@DaChris

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

fits perfect

@neophile

I must be missing something... I printed this in PLA first, the holder nobs immediately snapped when trying to install it. So yeah... PETG it is then. Unfortunately, due to the nobs being glued to the main holder, I had to reprint the whole thing. A holder version, that is not glued, but slid into a rail would be better I think. Next thing is: I can't really get the whole thing to actually hold on my Skadis. That is both with the Echo installed and without it. Once you run the cable through I see even slimmer chances, because it sticks out the back and thereby creates a force pushing the already loose sitting holders away from the skadis. All of this could be resolved by using a different type of holders. Please consider changing this @user_2642504090 - because everything except for the holder nobs feels like a perfect fit. Unfortunately in it's current stage, it not very usable for me. Thanks for the effort and please take this as the constructive critic it is. :)

(Edited)

@brezelbaker

Print Profile

0.2mm layer, 2 walls, 15% infill

Strength Issue:printed well but after gluing together I did not manage to put it on the board without breaking the pins. maybe change the pins to another design ... also the bent in the cable felt too narrow and made a very tight turn ...