Transport Box Z Gauge, Miniclub, Märklin

Summary

Small transport box for Z gauge (Märklin Miniclub) trains or wagons.
Scale 1:220

Small Transportbox for Z Line Trains or wagons (Märklin miniclub)
Scale 1:220

Print Settings

Printer:

Replicator -Selfmade

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

20%

Notes:

Very easy to print.

Very easy print.

Post-Printing

A piece of foam must be inserted into the lid to securely hold the locomotive/wagons in the box! The thickness is up to each individual, but I recommend at least 3mm, as the locomotive/wagons could otherwise move.
ATTENTION: For electric locomotives, caution is advised due to the pantographs; too much foam creates too much pressure, too little does not secure the locomotive properly. It is best to only use for steam locomotives or diesel locomotives.

The "clamps" are included so that the box does not push itself apart due to the foam.

EN:

In the cover must be a piece of foam to secure the locomotive / wagons firmly in the box! How thick is up to you but I recommend at least 3mm because the locomotive / wagons can move otherwise.
ATTENTION: By electric locomotives take care of the pantographs, too much foam makes too much pressure, too little ensures the locomotive not correct. At best use only for steam locomotives or diesel locomotives.

The "brackets" are that the box does not press itself apart because of the foam.