*** ATTENTION: Seems like Thingiverse somehow corrupted the "Download All" button for this design. Just download the files individually from the files section, they still work! ****

This is an organizer for the boardgame Barrage / Wasserkraft.

It holds everything from the base game, the Leeghwater expansion, and KS exclusives except for the 3D map.

Space was a little tight with the setup I went for so some walls are only 0.8 or 1.6mm wide but it works fine.

**EDIT: There seem to be some tolerances in the pieces for the contracts so I added a 2nd version of the Setup box to cater for that.**

**EDIT 2: I added a new box for the Nile expansion. This will lead to about 15mm of lid lift but you don't have to reprint any existing boxes.**

Print as follows:

Player: Boxes for all player pieces, print 5 of them
Setup: Contains mostly pieces only required during setup of the game, print one.
Expansion: Contains most of the expansion pieces. print one.
Res: Contains all resources (including metal coins), print one.
Tokens: Contains basically all other tokens used in the game, print one. EDIT: I added another version with the box split roughly in half so it can be printed on printers with smaller print beds.
Spacer: Optional print to keep pressure from the wheels if not put as the top layer and to serve as a lid for the boxes below.

There are pictures showing the order in which I put everything but it is also possible to put the boards on the bottom and stack the boxes on top.

Let me know if you have any questions or issues with the insert.

The wheel improvements and water drop replacements are the aweome things designed by JMPlus ( https://www.thingiverse.com/thing:3819024 )!

Creality