100+110mm (4") Cyclone for custom lid/barrel/drum

Based on a great model from BurnbabyByrne, I've done some further work and optimizations to make it fit my needs better. Sharing here if others need it:

• Extended the external ports to allow for a hose/adapter connection. 
• Added extra print profile for TPU gaskets/seals
• Added extra print profile for adapters that allows for direct fitting of standard 110mm PP pipe (104mm inner ø side).
• Modified print profile to allow for two ports pr plate for optimization. 

In my case I had a standard 60L plastic barrel I wanted to use for the cyclone. I cut out the lid and fitted a 5mm plexiglass top to (so I could keep an eye on when it needs to be emptied without having to take off the lid). I drilled the 100mm holes + a 28mm one for the vacuum valve (dust commander dust-sp from amazon so the barrel won't collapse if the suction is blocked).