Ubiquiti Superlink High Gain Antenna Wall Mount

I was bummed the Ubiquiti Superlink High Gain antenna didn't include a silly wall mount and I didn't find one on here via search, so I whipped one up real quick last night in Fusion360. I printed it at 101% because I was a little too precise with my measurements and it seemed a bit too snug at 100% with my first print. I saved the 3mf with the 101% scale in Orca Slicer, so just double check before you print. If it loads in your slicer really small, just go to objects vs global settings, select the object and “convert from inches” should put it at the correct scale, just remember to scale up from there to 101%. I printed it on an X1C with SUNLU White PETG. 34.8276 x 48.3285 x 128.27 mm should be the object size to print it at.