Tapo C125 Camera Fastener Adapter

🔗 Compatible Mount
This fastener is designed to be used with an existing A1 / A1 Mini camera mount created by another designer.
You can find the compatible mount here:

A1 and A1 Mini Compatible Mount/ GoPro/ Tilt Plate

The fastener shown in the images is my original design and serves as the mechanical link between the camera and an already existing mount created by the designer's model above. My model is not affiliated with the original mount designer. The link is provided for user convenience only.

🔧 Assembly Overview

As shown in the images:

• The threaded fastener features:
  • A 9 mm threaded end that screws into the nut-style mount
  • An eyelet-style interface on the opposite end that connects directly to the Tapo C125 camera
• The nut-style component receives the threaded fastener and secures it to the existing mount

Once assembled, the camera is firmly connected while still allowing clean alignment and adjustment.

Settings/Need to Know: 

3 walls
100% infill
I had to have a .40 X/Y compensation for the threaded end to fit the fastener nut.
The recessed spots on the eyelet could probably use a .50 x/y compensation to fit the washers properly. If you have the camera you will know what I am referencing.

📦 What’s Included

• One custom fastener adapter (original design)

❌ What’s NOT Included

• Camera mount
• Mount base or arms
• Camera hardware
• Any files created by other designers

These must be obtained separately from their respective creators.

✅ Compatibility

• TP-Link Tapo C125 camera
• Existing A1 / A1 Mini camera mount systems that use a nut-style attachment

⚠️ Notes

• This is a functional adapter, not a complete mounting solution
• Verify fit and tolerances before final installation. 
• No affiliation with TP-Link or the original mount designer