Minimalist Wall Mount for Internet Router

🌐 Minimalist Wall Mount for Internet Router

This model is a wall-mounted support designed to safely hold an internet router, combining strength, efficiency, and minimal filament usage.

It was designed for routers with up to 20 cm width, 20 cm depth, and 5 cm height, providing a secure fit while keeping the device elevated, ventilated, and neatly organized on the wall.

✨ Key Features

• Optimized for standard home routers
  Designed specifically for routers measuring approximately 20×20×5 cm, ensuring proper support and stability.
• Strong yet material-efficient design
  The structure was engineered to use the minimum amount of filament possible without compromising strength, balancing rigidity and lightweight construction.
• Wall-mounted with screw fixation
  Includes two dedicated mounting holes compatible with 5 mm screws, ensuring a solid and reliable wall installation.
• Improved airflow and heat dissipation
  The open-frame design helps prevent heat buildup, keeping the router well-ventilated during operation.
• Single-color, easy print
  Designed to be printed in one color, with no AMS required, making it simple and accessible for any setup.

🖨️ Printing Recommendations

• Material: PLA or PETG
• Layer height: 0.20 mm
• No supports required
• Infill: 15–25% (adjustable depending on desired strength)
• Orientation: print as provided for optimal strength along load directions

🧠 Notes

• Use proper wall anchors depending on wall type (drywall, masonry, wood).
• PETG is recommended if the router generates more heat or if installed in warmer environments.
• Always test fit and load gradually after installation.