3DPrintPCParts

cover

SAM_0946.webp

SAM_0945.webp

SAM_0944.webp

SAM_0943.webp

SAM_1603.webp

SAM_1623.jpg

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Hier eine neue Version des Radiatorständers.Die files beinhalten die Streben für 120mm mount und 140mm mount sowie die optionalen Stabilisierungsstreben.Geeignet für Radiatoren mit 120er und 140er Lüftern. Gedruckt werden die Grundplattform und je zwei Streben. Ihr könnt dann unten in die Streben M4 Ruthexeinsätze einschmelzen. Ebenso für die Verstärkungsstreben könnt ihr M4 Ruthex Gewindeeinsätze nutzen.<h2>3D-Druckeinstellungen</h2>Druckempfehlung der Stabilität wegen.PLA 100% infill PETG 75% infill PETG Carbon mindestens 50% infill ABS 50% infillASA 50% infill&nbsp;<boostme><boosttitle>Boost Me</boosttitle></boostme>

Here is a new version of the radiator standThe files include the struts for 120mm mount and 140mm mount as well as the optional stabilization strutsSuitable for radiators with 120mm and 140mm fans. The base platform and two struts each are printed. You can then melt M4 Ruthex inserts into the bottom of the struts. Similarly, for the reinforcement struts, you can use M4 Ruthex threaded inserts<h2>3D Print Settings</h2>Print recommendations for stabilityPLA 100% infill PETG 75% infill PETG Carbon at least 50% infill ABS 50% infillASA 50% infill&nbsp;<boostme><boosttitle>Boost Me</boosttitle></boostme>

Print Profile(0)

Bill of Materials

Description

3D Print Settings

Comment & Rating (0)

License

Related Models