Gold sluice - Free 3D Print Model

Search models, users, collections, and posts

MV3Design

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

H2D

H2C

X1E

P1P

H2D Pro

P2S

H2S

X1 Carbon

X2D

A2L

Gold sluice 200mm ; 0.2mm layer, 4 walls, 35% infill

Designer

34.2 h

8 plates

5.0(1)

150mm Gold Sluice ; 0.2mm layer, 4 walls, 35% infill

Designer

34.3 h

9 plates

Open in Bambu Studio

Boost

Released

Description

Content has been automatically translated.

Show original

Description and images will be updated in the coming days

Thanks to its modular design, this gold panning sluice can be modified and rebuilt as needed and desired. The sluice can be assembled / disassembled completely without tools

This gold panning sluice is currently available in the following versions:

200 (200mm inner width)

150 (150mm inner width)

For each version, I have created a separate print profile that includes all components/optional accessories

Version No. 0 is the basic variant. Here you can glue in/insert the mats yourself

Required accessories:

per handle → 2x hex screw M6x16mm

→ 2x washer for M6

→ 2x wing nut for M6

per sluice connection → 2x hex screw M6x30mm

→ 2x washer for M6

→ 2x wing nut for M6

Other variants of the sluice, height adjustment with feet, and various mats are planned. Suggestions and feedback are always welcome

Comment & Rating (6)

@user_3611570131

first print failed to print it started, lifting on the left hand corner towards the front door of my P1S using PETG change my build plate now I’m attempting to print it using PLA. last picture is PLA and the PETG I was using

(Edited)

The designer has replied

@MV3Design

I just saw that I made my own comment instead of replying to your post. sorry I'm sorry to hear that. Have you tried drying the filament before printing? I had similar problems at the beginning when I printed larger parts and the filament was not dry. I clean the build plate with isopropanol before printing. Since then, I have no more problems with warping. I used the Textured PEI Plate and the Bambulab PETG HF.

Show original

@user_1068203313

Boosted

Wow absolutely perfect 🙌 I tested them the last few days and I'm absolutely in love Possibly, with lock for the mat that can be used, a locking option would still be perfect for attaching the mat front and rear I glued a mother to the front and after the first shovel of sand it held up perfectly thank you ❤️

The designer has replied

@MV3Design

Thank you very much 🤩 could you, if it's not too much trouble, post a picture of your mounting solution?

Show original

@MV3Design

I am sorry to hear that Did you try drying the filament before printing? I had similar problems at first when I printed larger parts and the filament was not dry. I clean the build plate with isopropyl alcohol before printing. Since then, I have had no more problems with warping. I used the Textured PEI Plate and Bambulab PETG HF.

Show original

@AnGeLoV_873

Print Profile

Gold sluice 200mm ; 0.2mm layer, 4 walls, 35% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.