Phrozen Mighty 8K vat lids

This is a set of lids, and trays, for protecting and storing your Phrozen Sonic Mighty 8K trays. It comes in a number of different options, suitable for whatever FDM printers you may have. The full lids would require a larger printer, such as the Prusa XL.

Updates

• 2024-03-06: Redid the design for the Bambu multi-color printers.

Lids

The lids comes in two basic models:

• Full: These are the full models, requiring a pretty large print area
• Split: These are split with dove tails, and should print on almost any FDM printer

The split models, with the dove tail joints, fit perfectly printed on my MK3S with a 0.20mm extra gap. However, on one of the Creality printers, it was a fairly snug fit and I had to use a mallet to hammer (carefully) the two pieces together. That still worked well, and made a perfect joint without glue!

In addition, the lids have one variation:

• Holes: These have holes cut out to allow putting a lid on without removing the vat screws. This is what I use for my day to day protection of the resin in the vat when not printing.

Note that the text and logo parts are the same for both variants, with or without holes. The .3mf file is setup for this, but if you do your own profile, just import the text and logo parts and make sure to say “Yes” when it asks for it to be a single part with colors.

I'd love to hear success or failures here, to see what I may have to change and fix.