Catan resource box
Print Profile(2)
Bill of Materials
Description
A small, practical box that keeps your CATAN resource cards organized and safely stored.
Supported card sizes:
- 54x80 mm
- 43x67 mm
Please ensure to select the print profile that matches your CATAN resource cards.
Assembly:
- Use a small piece of filament as a hinge pin to connect the parts.
- Insert 4 magnets, size: 6x2mm
Update (2026-05-03)
I've trimmed the height and the inside of the flaps slightly. Some users experienced that the box would'nt fully close. Please let me know if the problem persist.
Update (2026-03-06)
I've increased the height of all print profiles slightly to make room for expansion packs. Thanks for all your feedback!
Boost Me (for free)
Thank you ❤️
Tips and tricks for better results
- If the pins are hard to insert, use a pliers and force them in a few mm at a time, or the pin will bend.
- If the lid doesn't fully close, try expanding the pin holes slightly with a 2mm drill at the end of the lids.
- Use strong magnets! I've had great result with the ones from the Bambu store, and not so much with the cheap ones from Aliexpress and similar sites.
- Try different filament
- Calibrate your printer
- If everything fails, let me know and I'll do my best to assist
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (130)