HERO MAN HE MAN BATTLECAT

For testing, I printed it at 8 cm. The supports are very delicate, but with extreme care and tweezers, they can be removed without leaving damage, but they need to be removed one by one slowly.
PLA Basic white
0.16
hybrid tree supports
10mm outer brim only
0mm object spacing

If you want to collect them all… come here (the trap is ready)

https://makerworld.com/it/@Gara/upload

Technical notes (the truth, not poetry)

I prefer to print them in a single color and paint them after priming, using acrylic markers.
The colored images serve as coloring examples, but then it's very much up to personal taste.
This design originated from an AI generation (Tripo) which I manually refined and tested on FDM prints to ensure printability and quality.
The "real" photos are the single-color (white) ones.
When detaching the supports: tweezers, calm, delicacy (no need to go Rambo on the support, or you'll cry).

As always (the part that decides if you print or curse)

There's only one key: build plate adhesion.
I use CryoGrip Pro Frostbite, and the adhesion is so good that prints seem to have a mortgage on the build plate: they never let go.
I mainly use Bambu filaments and have no problems.
If you have a different setup:

focus on adhesion (first of all)

use dry, quality filament

do things cleanly and you'll see that "mysteriously" everything works much better