Sewing Machine Thread Rack

Sewing machine dual large thread stand, which can be mounted on the machine or placed flat on the desktop. As far as I know, suitable models for mounting include Aicomake 653, Feiyue 811, Jiadebao 653, Good Mood 653... There are actually more, but the specific models are unknown, please compare by looking at the pictures yourself. Theoretically, any sewing machine can use it when placed flat on the desktop, but there will be an extra accessory (named: fixed base), which can be deleted or skipped from printing. When placed flat on the desktop, it can be secured with 2 M3 self-tapping screws or double-sided tape

Due to the nature of 3D printing, some parts are easily damaged, so I opted primarily for screw assembly, allowing for quick individual replacement even if a part breaks

For machine mounting: one original machine fixing screw, seven M3*10 round head self-tapping screws, two 693ZZ (3mm inner, 8mm outer, 4mm thick) bearings (not mandatory, but recommended; otherwise, the lifespan of the thread holes at the top of the thread stand will be significantly reduced!)

For desktop placement: four or six M3*10 round head self-tapping screws, two 693ZZ (3mm inner, 8mm outer, 4mm thick) bearings (not mandatory, but recommended; otherwise, the lifespan of the thread holes at the top of the thread stand will be significantly reduced!)