Vevor Water Distiller Pour Spout

This is a remix of https://makerworld.com/en/models/835838-spout-canister-din45 modified to fit on the Vevor Water Distiller Model # YMK40101, and added a gasket to give it a better seal. I printed it without supports, but you might want them just for the threads on the cap if needed. I designed it to be able to fit under the drip spout of the distiller without touching it to catch all of the water without spilling any, and to be able to pour the water out into another container or device without it spilling everywhere. I couldn't get a perfect drip free seal with the cap so I recommend using a food safe silicone to seal up any possible tiny gaps for a completely leak free pour, I recommend https://www.amazon.com/dp/B00NU6VN6G it works great. The breathing tube connects to the bottom of the spout to allow air back in to prevent a vacuum and give you a nice controlled pour. The TPU Gasket goes in-between the Spout and the Cap for a better seal. I recommend printing the rest of the pieces in PETG, since the water and distiller can get pretty hot.