Proxmark 3 Easy Snapfit Case

A high quality case for your Proxmark 3 Easy. Extremely precise with no rattling or loose parts.

Warning!

The fit is extremely tight, so you may need to force it in a bit. Some variants of the Proxmark 3 Easy may have different screw positions and won't work with this case.

When printing the top piece, use the linear supports. DO NOT USE TREE as it will be very difficult to break off.

PLA or PETG is recommended. A clear filament will let you see the led lights too.

Assembly

Place the Proxmark 3 inside the bottom case, making sure to push the screws all the way into the holes.

Place the top case on top and push down. It will take a bit of effort, but you should hear a click, and the case will be tightly secured.

Disassembly

If you ever need to get your Proxmark 3 out of the case, there are cutouts around the case for easier prying.

Just stick a flathead screwdriver in the cutout and twist to push both parts of the case away from each other.