MEMORIAL DAY US SOLDIER WALL ART ARTE MURALE

This image depicts a **patriotic wall decoration**.

The artwork celebrates US military veterans and service members through various symbolic elements:

• **Main silhouette:** A soldier in a military salute position, equipped with an assault rifle and a helmet.
• **Internal details:** Inside the silhouette, a military aircraft in flight can be seen, along with two other soldiers, one with an assault rifle and another proudly holding the **United States flag**. 

Printed in Bambulab PLA in black, blue, and red The printing is very easy 

The colors can be changed from the slicer at the time of printing if you want only one color just go to “Color Painting” and press “Clear all painting”

The model can be enlarged or reduced as desired Usually 2/3 mm thickness is more than sufficient If you enlarge them on the x and y axes keep the “Uniform Scale” function active then to reduce the thickness uncheck “Uniform Scale” and only adjust the z-axis value 

I have prepared it on the build plate to have the textured surface finish typical of printing in contact with the plate If you want to print it with a smooth finish rotate it 180 degrees on the Y-axis (of course I hope you have set up good ironing) 

A tip I always give is to first clean the build plate with dish soap and a sponge rinsing with hot water then dry it with compressed air avoiding touching the surface with your hands I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio Personally before printing I dry the PLA with AMS 2 PRO for about 1 hour It is these small precautions along with many others that determine the success of a beautiful print.

Before leaving negative reviews please adjust these parameters If you have difficulties or continue to experience problems do not hesitate to contact me we will look for solutions together in a perfect collaborative atmosphere I have made several prints of this object and they all came out perfect as in the photos if you have incorrect parameters dirty or clogged nozzles poorly calibrated machines humid or poor quality filaments do not blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm
• Initial layer height 0.2 mm
• 2 wall loops
• Top shell layers 5
• Bottom shell layers 3
• Infill 15%
• Infill pattern Grid
• No supports
• Outer wall speed 200 mm/s
• Inner wall speed 300 mm/s
• Normal print acceleration speed 10000 mm/s
• Outer wall acceleration speed 10000 mm/s