The Good, the Bad and the Ugly bookmark (set of 3)
Print Profile(1)
Description
Boost Me (for free)
Bookmarks size: 130x60mm each one.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2mm
#000000 PLA+ Esun Black Transmission Distance: 0.5
#646464 PLA+ Sunlu Grey (dark) Transmission Distance: 3.5
#6f7779 PLA+ Jayo Grey Transmission Distance: 3
#ffffff PLA+ Esun White Transmission Distance: 10
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey (dark)
At layer #10 (0.88mm) swap to Grey
At layer #13 (1.12mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)