Absol Pokemon — NO AMS Multipart + AMS Multicolor

Bring Absol to your shelf with two print options — whether you have an AMS or not!

✅ Included versions

• AMS Multicolor: clean color separation for a crisp finish.
• NO AMS (Multipart): parts are split by color for single-color printers (also paint-friendly).

🧩 Assembly (easy)

Most parts fit together cleanly and assemble very easily.
Glue is optional, but recommended for a strong, permanent build—especially for the smaller details.

Small parts tip: dry-fit first (test without glue). 

🐾 Claw placement guide

I included a simple claw-position guide (see image). Use it as a “map” during assembly.

• Inside each zone, the claws are arranged the same way they should appear on the paw (toe order left → center → right).
• Extra rear claw pieces (if any) are placed above the main toe claws in the rear zones.

🖨️ Print recommendations

• Layer height: 0.16 mm (or 0.12 mm for extra crisp details)
• Infill: 10–15% (display piece)

• Supports: only if needed depending on your orientation (check preview)

   

📌 Notes

Fan-made model inspired by an iconic character — not affiliated with or endorsed by any rights holders.
If you like the model, a Like / Boost really helps 😊

Give me a boost if you like my work :-)

Explore my my profile to see all my other models