浪子光

cover

IMG_20260204_073342.jpg

IMG_20260204_073458.jpg

打印盘.png

简易收纳盒与盖子Simple storage box and lid

plate_1.png

R31~R35

plate_2.png

R36~R40

plate_3.png

R41~R45

plate_4.png

R46~R50

plate_5.png

R51~R55

plate_6.png

plate_7.png

为了适应a1mini，每盘就放了5个测量片其他打印机请自行调整摆盘首层单层墙，首层颜色打印顺序：白→黑&nbsp;To accommodate the a1mini, each plate only holds 5 models.

To accommodate A1 mini, each plate only holds 5 measurement piecesFor other 3D Printers, please adjust the plate layout yourselfFirst layer single wall, first layer color printing order: White→Black&nbsp;To accommodate the a1mini, each plate only holds 5 models.

Fillet Measurement_R31-60_Normal print

一盘打完

包含收纳盒一盘打印完整主体使用PETG，支撑面使用PLA需要换料冲刷19次，建议使用H2D或H2C打印pla支撑面建议与主体PETG使用相同的颜色，否则会像照片中那样被轻微染色请一定要涂胶后打印，一旦发生翘边，会导致上方堆叠的零件全部失败&nbsp;All models printed in one plateMain structure uses PETG, support surfaces use PLARequires 19 material flushes; recommended to use H2D or H2CFor PLA support surfaces, use the same color as the PETG main structure to prevent slight staining as shown in the photoAlways apply adhesive before printing. Warping will cause all stacked parts above to fail

Includes a storage box, prints entirely on one plateThe main structure uses PETG, and support surfaces use PLARequires 19 material flushes; recommended to use H2D or H2C for printingIt is recommended that PLA support surfaces use the same color as the main PETG body, otherwise they will be slightly stained as in the photoPlease be sure to apply glue before printing; once warping occurs, all stacked parts above will fail<p&nbsp;

Dual Material Support Stacked Printing - ALL-IN-ONE

仅测量片

A1mini √仅包含圆角测量片主体使用PETG，支撑面使用PLA需要换料冲刷19次，建议使用H2D或H2C打印pla支撑面建议与主体PETG使用相同的颜色，否则会像照片中那样被轻微染色请一定要涂胶后打印，一旦发生翘边，会导致上方堆叠的零件全部失败&nbsp;Only rounded corner gaugesMain structure uses PETG, support surfaces use PLARequires 19 material flushes; recommended to use H2D or H2CFor PLA support surfaces, use the same color as the PETG main structure to prevent slight staining as shown in the photoAlways apply adhesive before printing. Warping will cause all stacked parts above to fail

A1 mini √Only includes rounded corner gaugesThe main body uses PETG, and the support surfaces use PLARequires 19 material changes for flushing, it is recommended to print with H2D or H2CIt is recommended that the PLA support surfaces use the same color as the main PETG body, otherwise it will be slightly stained as shown in the photoPlease be sure to apply adhesive before printing; once warping occurs, all stacked parts above will fail&nbsp;Only rounded corner gaugesMain structure uses PETG, support surfaces use PLARequires 19 material flushes; recommended to use H2D or H2CFor PLA support surfaces, use the same color as the PETG main structure to prevent slight staining as shown in the photoAlways apply adhesive before printing. Warping will cause all stacked parts above to fail

Dual-material support stacked printing - Only rounded corner gauges

SENWO山雾

Rounded Corner Diameter Measurement Tool, R1~R30 Inner and Outer Angle Manual Multicolor (Printable on A1 mini in 4h 19m, 144g)

圆角测量直径测量器测量工具R1~R30内外角手动多色（ A1 mini可打 4h19m 144g ）

基于“SENWO山雾”制作的R1~R30圆角测量仪的拓展拓展了R31~R60的角度由于每个测量块都比较大，因此需要多盘打印也可以选择双料支撑堆叠打印，堆叠打印的具体信息可以查看打印配置内的描述&nbsp;Extension of the R1–R30 Radius Gauge Based on “SENWO山雾”Extended to cover angles R31–R60Due to the large size of each gauge block, multiple print passes are requiredAlternatively, dual-material support stack printing can be selected. Specific details for stack printing are available in the print configuration description.

Extension of the R1–R30 radius gauge based on “SENWO山雾”It extends to cover angles R31–R60Due to the large size of each gauge block, multiple build plates are requiredAlternatively, dual-material support stack printing can be chosen. Specific details for stack printing can be found in the print profile description<p&nbsp;

Print Profile(3)

Description

Comment & Rating (0)

This remix is based on

License

Related Models

Radius Gauge R31-R60