PSA Dagger Micro 10 Round Limiter

I couldn't find any printable 10rd limiters for the 15 round PSA Dagger Micro mags so I made one.
Replaces the OEM baseplate and locking tab.

These magazines are compatible with any of the slimline 9mm Glocks, such as the 43, 43x, 48, etc.

Both files are pre-oriented, print with supports on build plate only.

This design has survived extensive drop and feed testing without issue. No bulging, no cracking, no jamming, no ejecting.

Test results were achieved with annealed Polymaker/Fiberon PA6-CF. PA6-GF, PPA-CF, etc likely work just as well.

If you print it in anything else, make sure you test it extensively.

The baseplate is self retaining with the locking tab but you may want to epoxy it in place depending on your local laws.

Proudly designed and tested in the free state of Florida for our less fortunate firearm owners in restrictive states.