2, 3 & 4Blade Propeller Spinner 50 mm BF109 (Tony)

2, 3 and 4-Blade Propeller Spinner 50 mm

3-blade propeller spinner designed for the BF109 (Tony) by 3DLabPrint.
With a 50 mm diameter and 35 mm height, it fits perfectly with a Supernylon 8"x6" 3-blade propeller and a Turnigy SK3 Aerodrive 3536 (1200 kV) motor.

The spinner is secured using one M3x15 or M3x15mm  countersunk screw.

It can also be used on other aircraft models with a 3-blade propeller, provided the prop shaft has a diameter of 6 mm, an internal M3 thread, and a shaft length of 24–26 mm.

The spinner is designed for clockwise rotation but can easily be mirrored in Bambu Studio for counterclockwise propellers.

Additional versions are included for 2- and 4-blade propellers, as well as a variant with smaller propeller cutouts.

Two print profiles are included: an easy-to-print version with 2 walls weighing 7.5 grams, and a lightweight version weighing just 5.5 grams.

If you need to adapt the propeller spinner to a different diameter, check out my parametric version of this model.

With the parametric model, you can easily adjust the spinner to fit your specific propeller size.

➡️ Parametric model: https://makerworld.com/en/models/2401895-propeller-spinner-generator

New Clip-On Version Available:

If you like flexibility and quick installation, check out the Propeller Spinner Generator – Clip-On Version. This new model uses a baseplate and clip-on spinner cap system, compatible with 2–6 blade propellers, making assembly simple and allowing easy removal.

https://makerworld.com/en/models/2490684-propeller-spinner-generator-clip-on-version