Potted Cactus Wall art

These decorative potted cactus elements are ideal for a modern and minimalist style.

They are perfect for furnishing living rooms, offices, or bedrooms, adding a natural touch without the maintenance of real plants.

It is a coordinated 4-piece set, with different types of succulents and cacti.

Printed in black Bambulab PLA. Printing is very easy.

I have prepared two vases on each print bed. If you don't want to print them all, choose the ones you are interested in and remove the others (or just print the desired bed).

Colors can be changed from the slicer at the time of printing, the model can be enlarged or reduced as desired. Usually, 2/3 mm thickness is more than sufficient. If you enlarge them on the x and y axes, keep the “Uniform Scale” function active, then to reduce the thickness, uncheck “Uniform Scale” and act only on the z-axis value.

I have arranged them on the plates to have the textured surface, typical of printing in contact with the plate. If you want to print them with a smooth finish, rotate them 180 degrees on the Y-axis (of course, I hope you have set a good ironing).

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with an AMS 2 PRO for about 1 hour. These small measures, along with many others, are what determine the success of a good print.

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me, and we will find solutions together in a perfect collaborative environment. I have made several prints of this object, and they all turned out perfect as in the photo: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, damp, or poor quality filaments, do not blame me.

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm
• Initial layer height 0.2 mm
• Wall loops 2
• Top shell layers 5
• Bottom shell layers 3
• Infill 15%
• Grid pattern
• No supports
• Outer wall speed 200 mm/s
• Inner wall speed 300 mm/s
• Normal print acceleration speed 10000 mm/s
• Outer wall acceleration speed 10000 mm/s