The Death Of Superman Comic cover Hueforge.
Print Profile(1)
Description
Superman comic “The Death Of Superman" comic cover Hueforge.
if you like this please consider boosting the model, it helps me to continue making different comic covers.
Project: superman.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 166.67x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #13 (1.12mm) swap to Blue
At layer #17 (1.44mm) swap to Yellow
At layer #22 (1.84mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)