MTG Command Station Custom Art Box Krenko Mob Boss

The Command Station: An all-in-one deck box designed to carry everything you need to play Commander.

The deck box body is debossed with “Krenko” in a mob/Sopranos style font.

You can't play Krenko without a bunch of Goblin Tokens. I have two different custom goblin tokens that you can print here and here.

• Custom Art Lid - Krenko Mob Boss

  The image is embedded in the print file, so it's easy to customize the colors to your liking. This lid features art on both sides.

• Commander Display Slot
  Show off your leader in style. A dedicated slot holds your commander in a toploader or mini-snap case.
• Locking Dual Purpose Lid
  The lid connects to the base via a rear precision fit tab and aligns cleanly with four pairs of 6mm x 2mm round magnets. The lid also functions as a convenient dice and token tray while you're playing AND as a slot to hold your commander while it's in the command zone.
• Dedicated Deck Tray
  Sized for 100 double-sleeved cards, your deck sits snug and protected.
• Separate Token Tray
  Keep your tokens, emblems, in their own compartment. The tray fits 12 of my custom tokens, or 20+ double sleeved standard tokens
• Nesting Dice Trays (x2)
  The nesting dice trays fit together for compact storage, perfect for dice, counters, or anything else your deck requires. Each tray will hold 12 d6 dice, or 4 spindown life counters and everything in between.

Use Loctite or similar strong adhesive to secure the magnets.
 

Important Print Info:

**This is for printing the lid and making sure the detail comes through. Regular print settings are fine for the inserts and main body**

This lid will definitely print best with a .2mm nozzle, but you can print with the .4mm (pictures are with the .4mm).

If you want to use the .4mm nozzle be sure to follow these instructions.The initial layer needs to be set to .3mm. Set the bed temperature to 65 degrees, this will make sure the fine initial layer adheres. Set the initial layer speed to 20mm/s and the initial layer infil speed to 50mm/s. Goes without saying, but make sure your plate is very clean for the lid.

No matter what nozzle you're using set the slice gap closing radius to .001.