Slim Nespresso Pixie Stand with Capsule Drawer

This slim Nespresso Pixie capsule holder is designed to keep your coffee station organized without taking up extra counter space. Each drawer holds 27 original-size Nespresso capsules and features a slightly sloped interior, allowing capsules to naturally roll forward when the drawer is opened. As capsules are used, the remaining ones automatically move to the front, keeping everything visible and easy to grab. 

A key design goal was maintaining a minimal horizontal footprint, making it ideal for compact kitchens and coffee corners. The holder fits neatly beneath your machine without increasing the counter space required. The frame is stackable and so you can print as many drawers and drawer frames as you'd like and easily stack them.

For easy printing, the model was specifically designed to print flat and stay within a maximum length of 320 mm, ensuring compatibility with Bambu Lab H2 series printers, including the H2C. No supports are required when printed as oriented in the file.

Features:

• Holds 27 Nespresso Original capsules
  • Includes an optional “mini drawer” that can also be printed that holds 6 capsules that can be used to keep any extra capsules in a cabinet.
• Sloped drawer design so that capsules roll forward
• Slim profile to avoid increasing counter footprint
• Prints flat, no supports needed
• Sized to fit within 320 mm build length (H2 series compatible)

Printing Notes

• This included profile uses 16mm High Quality to keep the rounded curves looking as nice as possible while still keeping the print time down. Feel free to adjust this if you would like a faster print time.
• The platform has more wall loops (4) and more bottom layers (5) than the rest of the objects. This is so that it can properly accommodate the weight of the machine. This is set as the default for the print profile just to ensure the that strength is there  by default. However, all other components were manually updated to use the default of 2 wall loops and 4 bottom layers to save time and filament. 
• For printers with a smaller bed size, the parts will need to be placed at an angle with supports. This has not been tested and so I unfortunately cannot confirm whether or not it will work properly.

Assembly

• Print all required components (platform, drawer, drawer frame, and four (4) dowels. 
• Place dowels in top of frame and align with bottom of platform
  • Note, dowels were used in this design to accommodate different printer accuracy. If the dowels are too loose/tight, you just need to scale the dowels and reprint instead of the entire model.
• Optional multi-drawer setup
  • Print another drawer frame, drawer, and 4 (four) dowels
  • Place dowels in drawer frame and stack under the previous drawer frame.