Print Profile(1)
Description
This decorative alphabet with sweet heart details is the ideal project for Valentine's Day. Whether as a personal message, table decor, or individual keychain – these letters are versatile and easy to print.
🛠 Important Technical Note
The model is optimized for a two-color print (Base + Hearts).
ATTENTION: If you change the size (scaling) in the slicer, the layer heights will shift. You must manually move the color change slider to the correct layer again after slicing!
✨ Pro Tip: Perfect Surface (Ironing)
For a particularly high-end finish on the top surface, I recommend using the "Ironing" function in your slicer:
Ironing Type: All upper surfaces
Ironing Speed: 15–30 mm/s
Ironing Flow: 10–15%
Line Spacing: 0.1 mm
🔑 Guide: Creating Keychains
Add a hole: In your slicer, add a "Negative Part" (Cylinder, approx. 3 mm) at a stable spot on the letter.
Stability: For keychains, use at least 25% Infill and 3 Wall Loops to ensure they are robust enough for daily use.
Print Settings
Material: PLA (e.g., Matte Red and White for Valentine's Day)
Infill: 10–15% (for decor) / 25% (for keychains)
Support: Not required
Layer Height: 0.2 mm recommended
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)