Raindrop - rubber band blaster (compatible with Xiaobawang firecrackers)
Print Profile(2)
Description
Rubber band powered, easy assembly, no supports printing, minimal hardware (4 M3 screws, 12mm-16mm length)
Disclaimer: Although not very powerful, it can still cause harm. Please do not aim at people or animals.
Required items:
| No. | Name | Quantity | Specification |
| 1 | Rubber band | 4 | 32mm diameter / 1.4mm thickness |
| 2 | Screw | 4 | M3X(12-16mm) |
| 3 | Protective tube | 1 | Approx. 20cm |
Assembly:
1. Cut the rubber band notches
2. Rubber band preparation
3. Main body installation
4. Stationery box installation
5. Handguard installation
Choose one of the two handguard options
6. Attach power rubber band
The power rubber band tends to snag during the loading process. It is recommended to add protection to the middle section of the power rubber band or use the third type of elastic rubber band shown in the figure (2.5mm-3.5mm diameter)
How to attach rubber bands:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (10)