Slowpoke Fountain Hueforge Pokemon Slowbro Pink
Print Profile(1)
Description
Project: Slowpokes.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 245x245mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23162mm
Filaments Used: (* = Owned)
#950051 * PLA BambuLab Matte Plum Transmission Distance: 1.6
#f5547c * PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#e4bdd0 * PLA BambuLab Matte Sakura Pink Transmission Distance: 3
#e1e4e7 * PLA eSun Cool White Transmission Distance: 2
This print uses 4 unique filaments
Swap Instructions:
Start with Plum
At layer #13 (1.12mm) swap to Hot Pink
At layer #20 (1.68mm) swap to Sakura Pink
At layer #24 (2mm) swap to Cool White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
Border Only Colors from here until the end.
At layer #28 (2.32mm) swap to Hot Pink for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)