大佬打这盘的时候支撑面很粗糙怎么办

What should I do if the support surface is very rough when printing this plate

user_521083944

这里这样摆放是最好的了，支撑面在外侧比较好修，可以用笔刀修一下，然后打磨打磨

Arranging it this way here is the best the support surface on the outside is easier to trim you can trim it with a hobby knife and then sand it down

井中月

a1mini 打的，70%大小全长80cm左右，刀刃得一个一个打，不然容易掉。有点伤手背

Printed on A1 mini at 70% scale the total length is around 80cm the blades must be printed individually otherwise they might easily detach it is a bit harsh on the back of the hand

kazami

La impresión de lujo, pero como bien dicen, se menea y es endeble, ni con buen pegamento se queda pegado....solo ha quedado entera en la foto xD

Luxury printing, but as they say, it wiggles and is flimsy, it doesn't even stick with good glue... it only stayed whole in the photo xD

Linderkin

0.2mm layer, 2 walls, 15% infill

Stusikkkk

Sora

这个位置的刀身链接件太弱了，组装好上了胶水后，刀左右摇晃会脱胶，前部分刀身会晃动

The blade connector at this position is too weak After assembly and applying glue the blade wobbles side to side causing the glue to detach and the front part of the blade will shake

user_83682687

user_3750333728

Metacera

Kingmagic

其他武器还出不、想搞一把“裁断”

Are other weapons out yet I want to get a Severance

Leo造物

cover

00D9A9CFF1BA308795112D2B3CF56C77_b8f848e3-34c2-42b6-8e50-1beb1db42202.png

0D1B98CD0EEA41E295D5FCE8327018B4_3682ccd9-0c24-4976-8bb9-696e06cc1311.png

713ABAB83D1165752F627ED45D98E360_a43eb8f2-4d73-4037-873e-ba1f6d9a0c98.png

506062C330EA98289A456A75FB116DA2_8a4a7792-6d3d-4a27-98d9-64d497a65e4d.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

00D9A9CFF1BA308795112D2B3CF56C77_747d26e1-10df-4c6c-bf1e-77accb9bc373.webp

00D9A9CFF1BA308795112D2B3CF56C77_99e4a69a-49a1-4bcc-95f6-5fdf4405a475.webp

0D1B98CD0EEA41E295D5FCE8327018B4_68398088-2778-466a-9505-9c4372f35ba7.webp

713ABAB83D1165752F627ED45D98E360_c6bed400-aee8-456e-a16d-aa235c7f6038.webp

506062C330EA98289A456A75FB116DA2_9fd91877-df89-4a92-ade9-6b0db6847361.webp

plate_1.webp

IMG_1284(20231214-122034)_6b0cd46f-4c2e-45e9-be94-0a88ec864828.webp

第一个文件刀柄没孔位  这个是有刀镡安装孔位的

The first file for the hilt does not have the hole. This one has the hole for the tsuba.

hasashin

photo_2025-01-26_21-53-12.jpg

Screenshot From 2025-01-18 23-02-22.png

photo_2025-01-18_23-23-55.jpg

I prepared colored version of Mistsplitter. Colors are not 100% accurate as in game (hilt color is different and there are no gradients). But it may come handy if anybody wants to print ready-to-use version with AMS. All print settings are kept from original profile.Colors used in project:<ul><li>Black - for hilt</li><li>Violet - for blade ornaments</li><li>Pink/Lignt violet - for blade ornaments, hilt accents and parts around emblem</li><li>Gold/Yellow - for emblem and other golden elements on hilt and blade</li><li>White/Light gray/Silver - for “cutting” part of the blade</li></ul>With colors changing, print time has increased significantly (from few hours to even few days for some plates). This can be dealt with by rotating sword pieces around but it may hurt the finish - current orientation is best for looks, worst for filament usage and time.

Fully colored set with correct hilt

原神雾切 1：1打印模型 分件已经做好可直接打印组装请打印打印配置2的刀柄  配置一的刀柄忘记给刀镡孔位了

Genshin Impact Mistsplitter 1:1 printable model. Parts are ready to be printed and assembled.Please print the hilt using printing configuration 2.The hilt in configuration 1 is missing the hole for the tsuba (sword guard).

Print Profile(3)

Description

Comment & Rating (36)

License

Related Models

Mistsplitter Reforged Genshin Impact

Print Profile(3)

Description

Comment & Rating (36)

License

Related Models