hi,it would be if this have a clip to make it more secure..i use asa to print it...it fit great..smooth printing...

krongkreng

Ho adattato questo progetto sulla mia Zontes ZT 350 X1 e devo dire che il risultato è ottimo. Accessorio molto utile quando il sole è molto forte.

I adapted this project on my Zontes ZT 350 X1 and I must say the result is excellent. Very useful accessory when the sun is very strong

Nu.Gundam94

0.16mm layer, 2 walls, 15% infill

Esse modelo é feito para encaixe direto no painel.

This model is made for direct fit onto the panel

Simone Messina

Encaixa mas nao prende. Qual o objetivo? Mal andas com a mota vai cair ou voar.

It fits but doesn't hold. What's the purpose? As soon as you move the motorbike it will fall off or fly away

SepolEleven

too loose..printing using asa..need to add on clip to secure it better

encaja perfectamente en la pantalla. No se que has utilizado tu oara fijarla ya que tiene un poco de olgura. Yo he usado cinta de doble cara. 
Muchas gracias!

it fits the screen perfectly. I don't know what you used to fix it as it has a bit of looseness. I used double-sided tape
Thank you very much!

XeXu3

user_4267493957

Feenas 3D

geokpg

cover

IMG_5156.jpg

IMG_5157.jpg

IMG_5143.jpg

plate_1.png

IMG_5146.jpg

Si consiglia l’utilizzo di PETG per garantire una buona resistenza al calore e una maggiore durata nel tempo; ABS/AES sono valide alternative per climi molto caldi. Il PLA è utilizzabile solo per test o per un uso non prolungato all’esterno.Impostazioni consigliate: Nozzle 0.4 mm, layer height 0,16 mm (optimal), line width 0,48 mm, infill 20–30% (grid o gyroid), 3 perimetri, 5 layer top e bottom. Temperatura ugello PETG 230–245 °C, piano 70–80 °C, ventola 30–50%. Velocità di stampa 50–60 mm/s.Supporti: Richiesti. Utilizzare supporti ad albero (tree support) con angolo 90° per garantire una corretta resa delle superfici e una rimozione agevole.Orientamento: Modello con base appoggiata al piano. Brim leggero opzionale per migliorare l’adesione.

It is recommended to use PETG to ensure good heat resistance and increased durability over time; ABS/AES are valid alternatives for very hot climates. PLA is only suitable for testing or non-extended outdoor use.Recommended settings: Nozzle 0.4 mm, layer height 0.16 mm (optimal), line width 0.48 mm, infill 20–30% (grid or gyroid), 3 perimeters, 5 top and bottom layers. PETG nozzle temperature 230–245 °C, bed 70–80 °C, fan 30–50%. Print speed 50–60 mm/s.Supports: Required. Use tree supports with a 90° angle to ensure proper surface finish and easy removal.Orientation: Model with base flat on the print bed. Optional light brim to improve adhesion.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Parasole per strumentazione progettato su misura per Zontes 368G. Riduce riflessi e abbagliamenti del sole migliorando la leggibilità del display durante la guida diurna. Design discreto, integrato e facile da stampare in 3D.&nbsp;Si consiglia l’utilizzo di PETG per garantire una buona resistenza al calore e una maggiore durata nel tempo; ABS/AES sono valide alternative per climi molto caldi. Il PLA è utilizzabile solo per test o per un uso non prolungato all’esterno.Impostazioni consigliate: Nozzle 0.4 mm, layer height 0,16 mm (optimal), line width 0,48 mm, infill 20–30% (grid o gyroid), 3 perimetri, 5 layer top e bottom. Temperatura ugello PETG 230–245 °C, piano 70–80 °C, ventola 30–50%. Velocità di stampa 50–60 mm/s.Supporti: Richiesti. Utilizzare supporti ad albero (tree support) con angolo 90° per garantire una corretta resa delle superfici e una rimozione agevole.Orientamento: Modello con base appoggiata al piano. Brim leggero opzionale per migliorare l’adesione.

Instrument visor custom designed for Zontes 368G. Reduces sun reflections and glare, improving display readability during daytime riding. Discrete, integrated, and easy to 3D print design.&nbsp;It is recommended to use PETG to ensure good heat resistance and increased durability over time; ABS/AES are valid alternatives for very hot climates. PLA is only suitable for testing or non-extended outdoor use.Recommended settings: Nozzle 0.4 mm, layer height 0.16 mm (optimal), line width 0.48 mm, infill 20–30% (grid or gyroid), 3 perimeters, 5 top and bottom layers. PETG nozzle temperature 230–245 °C, bed 70–80 °C, fan 30–50%. Print speed 50–60 mm/s.Supports: Required. Use tree supports with a 90° angle to ensure proper surface finish and easy removal.Orientation: Model with base flat on the print bed. Optional light brim to improve adhesion.

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models

Zontes 368G Visor Sunshade

Print Profile(1)

Description

Comment & Rating (13)

License

Related Models