Tattoo Lampe
Print Profile(2)
Bill of Materials
Description
Tattoo Lamp – Stylish & Easy to 3D Print Yourself
Here you'll find a stylish lamp that you can easily print yourself – perfect for a cozy atmosphere at home.
Two variants are available:
🧷 Variant 1: Glued
🔩 Variant 2: Screwed
______________________________________
🛠️ Recommended Print Settings:
🔲 Main Part
- Optimal Layer Height: 0.16 mm for fine details
- Time-saving alternative: up to max. 0.20 mm
🪵 Back Panel with Diffuser
- Recommended: 0.20 mm
- Maximum: 0.24 mm
- This ensures a particularly soft, pleasant light – ideal for a cozy atmosphere.
🔧 Details for the Glued Version
- LED Strips: Simply insert them – they usually hold well due to the adhesive surface on the back.
The printed support prevents the strips from detaching when heated (e.g., by COB LEDs). Recommended LED strip length: at least 74 cm
🔩 Details for the Screwed Version 🔩🪛
- Required accessories:
- 5x M3x6 heat-set threaded inserts
- 5x M3x12 screws
- 🔧 Tip: Please do not overtighten the screws to avoid damage.
I wish you much joy with printing and crafting! If you have questions or want to share your result, I look forward to your feedback!
Happy Printing!
Membership
Information on commercial licensing on MakerWorld
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)