Insta 360 X4 Lens Jig

A Simple Jig for Insta 360 X4 Lens repair.
To replace the lens you have to unscrew its nut, which is thread sealed with epoxy.

Best way to do in my opinion:

1. remove epoxy glue with scraper (also easier by using lens jig)
2. mount the lens on the holder piece
3. heat up only the lens to aprox. 80°C
4. clamp the lens with the lens jig
5. unscrew the nut

I printed in ASA (high temp resistant) 0.16 Layerhight, all supports allowed